International Institute of Building Enclosure Consultants
The International Institute of Building Enclosure Consultants (IIBEC) is an international association of professionals who specialize in roofing, waterproofing, and exterior wall specification and design.
Click to Learn More About the International Institute of Building Enclosure Consultants
Visit www.iibec.org and Join Now!
Displaying 76 - 100 of 109 results.
FIRST PREV [1-25] [26-50] [51-75] [76-100] [101-109] NEXT LAST SHOW ALL
Typically, all the brick selected for a given project will be either full bed depth (anchored) or thin brick (adhered); however, situations may benefit from combining the two types of masonry veneer on a project. The intent of this course is to differentiate between the types of brick masonry veneer, discuss the unique detailing required when combining veneer types, and provide project examples demonstrating where both types of masonry veneer have been successfully integrated. This course will focus on exterior applications of anchored and adhered masonry veneer.
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1056832
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Sustainable building envelopes demand high performance from and proper installation of continuous insulation and air, water, and vapor control layers. What happens when thousands of holes are made in these materials as they are installed with blind fasteners, one layer on top of another by different subcontractors? Sequencing issues can generally not be avoided; instead, this course focuses on self-sealing fasteners as a solution to avoid damage and thermal bridging in insulation and control layers. Various fasteners and anchors are described, and recommendations are presented for how to specify and what testing data to look for.
https://redirect.aecdaily.com/s1075056/www.aecdaily.com/course/1110425
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Understanding building physics is critical to proper building envelope design. Examined here are practical concepts for the building designer, including how cladding systems perform across different climate zones and applications. Environmental control layers and hygrothermal loads are reviewed, as is the concept of perfect/universal wall design. The course focuses on how single-component insulated metal panels (IMPs) function as a perfect/universal wall, simplifying wall system design and installation.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/826168
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/978835
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The modern aesthetic of metal facades is in high demand for applications ranging from education, healthcare, and office to residential and multistory mixed use. Recent high-profile fires have reinforced the importance of choosing the right metal cladding system that meets thermal performance requirements while not compromising life safety. This course compares various core materials and focuses on what the code requires for metal cladding in terms of fire performance testing and results and includes case studies from fire events around the globe.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/870419
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Finding ways to improve the energy efficiency of buildings is a key focus of many codes organizations, designers, architects, and government groups. This course examines how the roof of a building—one of the few parts of a building envelope that undergoes periodic replacement—impacts energy efficiency. It also explores how roof design can be a key contributor to meeting both sustainability and energy operating cost goals.
https://redirect.aecdaily.com/s6300/www.aecdaily.com/course/794005
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A sound building envelope should be sustainable and provide fire resistance, good thermal performance, and protection from the elements. Mineral wool, fire rated insulated metal panels (IMPs) can improve building performance and contribute to a sustainable design strategy. Included in this course are discussions on mineral wool IMP characteristics and design options, performance advantages, and installation considerations. The course details how fire resistance is specified in the International Building Code and provides examples of fire wall and fire partition construction assemblies.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/787410
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Creating a quieter, more comfortable building starts with a focus on windows and doors, the weakest links in the building envelope for sound transmission. This course covers the elements of sound, the metrics used to measure sound attenuation, and the glazing and installation options best suited for an effective sound control strategy.
https://redirect.aecdaily.com/s15106/www.aecdaily.com/course/958335
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As architects push the boundaries of design, materials that offer flexibility are essential; single-skin architectural metal wall panel systems provide such flexibility. Presented here are architectural metal wall panels, their fabrication process, design possibilities, and applications. Also discussed are the components and features of a perfect wall and a multicomponent wall assembly, the testing, safety, and installation of multicomponent metal wall panel systems, and how metal wall panels and their manufacturers can contribute to sustainability objectives.
https://redirect.aecdaily.com/s10015/www.aecdaily.com/course/1034074
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Thermally controlled environments such as cold storage freezers and coolers, and food processing and packaging facilities take many different forms. Their performance and functionality depend on their project-specific requirements and can be affected by the conditions the materials and systems are subjected to. This course discusses how insulated metal panels (IMPs) perform the necessary functions to provide an effective energy-efficient building envelope and why they are suitable for use within temperature-controlled hygienic environments—where performance is critical.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/811766
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Some roof underlayments can trap moisture, degrade insulation performance, and create excessive condensation accumulation. Breathable, self-adhering roof underlayments enhance the drying capacity of the roofing assembly and therefore improve roofing performance. This course investigates current developments in these easy-to-install, vapor-permeable roof underlayments that mitigate water intrusion, reduce long-term exposure to wetted substrates, and extend the life of the overall structure. The course concludes with several sample installations.
https://redirect.aecdaily.com/s480282/www.aecdaily.com/course/979622
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is one of the most widely used building materials throughout the world, and as such, it is in everyone’s best interest to consider more sustainable options. This course provides an overview of the properties of slag cement. Discussion topics include benefits, effects on plastics and hardened concrete, environmental profile including life cycle analysis (LCA) and environmental product declarations (EPDs), and various slag cement applications.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/852630
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As some of the earliest building materials, masonry and concrete have been used for their durability and strength. However, masonry architecture, both historical and contemporary, has been left vulnerable to water—the single most damaging element to masonry in our environment. This course identifies common water-related problems for masonry and concrete, describes protective treatments that increase masonry durability, and explains the process for safely selecting and applying a protective treatment.
https://redirect.aecdaily.com/s10541/www.aecdaily.com/course/895029
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Understanding how insulated metal panels comply with fire safety regulations under the code is critical to their proper use in creating highly energy-efficient and sustainable buildings. This course takes a relatively complex subject and addresses the most important fire safety aspects to allow building designers to make an informed decision on the use of these popular cladding systems. Also reviewed are how these products have been addressed in the development of the International Building Code and the various third-party product listings, evaluation reports, and engineering judgements used to show compliance.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/903336
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The role of a fire-rated door is to maintain the integrity of a fire-rated enclosure in the event of a fire, giving building occupants enough time to exit the burning building. This course is an introduction to fire-rated doors and a general review of the fire codes that relate to fire doors and hardware, referencing 2012, 2015, and 2018 IBC; NFPA (National Fire Protection Association) regulations; and the ADAAG (Americans with Disabilities Act Accessibility Guidelines).
https://redirect.aecdaily.com/s20103/www.aecdaily.com/course/881135
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Animals, plants, and microbes are engineers of what works and lasts on earth. Biomimicry is a practice in which nature’s designs, patterns, and strategies are examined to find sustainable solutions to our technical and design problems. This course discusses how applying the concepts of biomimicry can better connect our designs and buildings with nature and examines the relationship between nature’s solutions to light, heat, glare control, and shading design principles.
https://redirect.aecdaily.com/s584379/www.aecdaily.com/course/622057
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Protected membrane roof (PMR) systems offer many benefits to building owners and provide architects with design options that can maximize the energy efficiency, durability, and performance of a building envelope. This course compares the functional and physical features of PMR systems to conventional low-slope roofing applications and discusses the standard ASCE 7 and its impact on wind uplift design.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/874855
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Urban warming negatively impacts human health and quality of life, energy use, air quality, social equity, and economic prosperity. This course describes how solar reflective cool roof and wall materials help protect individuals and communities from the impacts of extreme heat and discusses the factors that influence energy savings and performance. The course also notes various climate resilience initiatives, green building programs, and energy codes that require or promote the use of cool roofs or walls and concludes by explaining the important role of third-party product ratings and the educational resources available online.
https://redirect.aecdaily.com/s1103477/www.aecdaily.com/course/1114079
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A high-performance building must address four major environmental loads: water, air, vapor, and thermal. The location of the required control layers is critical to effective envelope design. This course explores perfect/universal wall design and the use of single-component insulated metal panels (IMPs) to provide all four control layers. Presented here are discussions on the building envelope, rainscreens, perfect wall design, and IMPs, and more specifically, how to incorporate IMPs into engineered façade systems.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/846064
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Continuous insulation is part of building standards and state and energy codes due to its ability to reduce thermal bridging and the associated heat loss and energy consumption. This course looks at the use of polyisocyanurate as a continuous insulation in Type V and residential construction and its use as a multifunctional envelope component—air barrier, weather-resistive barrier, and vapor retarder—by reviewing code requirements for the building envelope.
https://redirect.aecdaily.com/s20151/www.aecdaily.com/course/664137
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Building science experts have acknowledged the need for both drainage and ventilation in exterior wall systems in order to eliminate moisture issues and extend the life of buildings. This presentation reviews the concepts of rainscreen technology and the solutions for compliance with a focus on engineered rainscreen drainage and ventilation mats used in direct-applied and ventilated wall designs.
Prerequisites: No
Course Level: Introductory
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/980729
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A metal roof combines performance and aesthetics to give commercial and residential buildings strength, longevity, and character. This course examines the features and benefits of standing seam metal roofing and explains the factors to consider when selecting a project-specific metal roofing system.
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/969021
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The diffuse light-transmitting and composite technology of translucent structural sandwich panels has increasingly caught the imagination of architects and designers because it is possible to maximize wall or roof daylighting while minimizing energy loss, with consequent savings in the running costs of heating, air conditioning, and artificial lighting. This course explores the fundamental connection between light and health by examining how translucent structural sandwich panels deliver glare-free, diffuse daylight deeper and more evenly into spaces with maximum thermal efficiency.
https://redirect.aecdaily.com/s8284/www.aecdaily.com/course/960286
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Concrete is the most widely used construction material in the world, second only to water. Over time, as a result of the build-up of atmospheric compounds in the surrounding environment, concrete will become discolored, stained, dirty, and dingy. This course examines photocatalytic technology which accelerates self-cleaning and fights air pollution while maintaining the mechanical and physical properties of traditional concrete.
https://redirect.aecdaily.com/s5654/www.aecdaily.com/course/857200
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
