National Association of the Remodeling Industry
The National Association of the Remodeling Industry strengthens the professionalism of the remodeling industry to build public trust.
Bathing facility code compliance does not have to result in an institutional look. Assisted living and healthcare facilities, hospitality installations, universities, multifamily buildings, and large commercial projects all have unique demands, and most require barrier-free, ADA, UFAS, ANSI, California Title 24, or Massachusetts compliant bathing and showering facilities. This course provides an overview of intelligent design solutions that simultaneously address these code requirements and the aesthetic and functional demands of each situation.
https://redirect.aecdaily.com/s811813/www.aecdaily.com/course/948090
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Protected membrane roof (PMR) assemblies have been widely adopted in low-slope commercial buildings since the late 1960s. Also known as inverted or upside-down roofs, PMR assemblies move the waterproofing membrane from the top of the roof assembly to the surface of the structural deck. This course explores how PMR assemblies provide several advantages over conventional roof assemblies, offering superior protection against water penetration and enhanced energy efficiency. The course also shows how PMR assemblies allow for the creation of green roofs or blue roof systems. With a proven record of reliability, PMR assemblies present a compelling solution for architects seeking innovative, sustainable, and efficient roofing options.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1091539
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.
https://redirect.aecdaily.com/s1039189/www.aecdaily.com/course/1089159
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As part of a well-designed rainscreen system, single-skin metal panels offer unique aesthetic options combined with the assurance that the building envelope will withstand the effects of long-term exposure to the elements. This course compares common cladding types; presents single-skin metal panel materials, coatings, finishes, and design options; and examines using single-skin metal panels with a single-component barrier wall to form a complete rainscreen assembly.
This course is one of two identical courses titled Single-Skin Metal Panel Building Envelope Solutions. You will receive credit for taking only one of these courses.
https://redirect.aecdaily.com/s18795/www.aecdaily.com/course/960872
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Rubber has been recycled for more than a century and used in recycled rubber flooring for over 65 years. Over this time, it has been proven to be a durable and flexible product that improves numerous aspects of the built environment while benefiting the natural environment. This course examines the sustainability attributes of recycled rubber flooring, how rubber is recycled, how it is used to make flooring, its health and safety benefits, and where to use and not use the product. The course also includes an overview of how recycled rubber flooring can be used to meet a number of USGBC’s LEED® v4 BD+C and WELL Building Standard® v2 credit requirements.
https://redirect.aecdaily.com/s4937/www.aecdaily.com/course/971493
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course introduces the learner to the benefits and design advantages of porcelain surface material for both indoor and outdoor use in residential and commercial projects. Since it is a relatively new material in the US, we will review its components and manufacture and how they result in a product with exceptional characteristics for human health and durability. We'll also show and discuss indoor and outdoor applications, the variations available for vertical and horizontal applications, and the many design options. Finally, we’ll help the learner understand what is needed to design with this material and how to work with a fabricator.
https://redirect.aecdaily.com/s1078641/www.aecdaily.com/course/1088872
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Selecting flooring is an important decision, but equal emphasis should be placed on proper surface preparation to avoid costly flooring failures. This course reviews best practices for a typical hardwood flooring installation and discusses the innovative options that consolidate products and steps, saving time and money while enhancing certain performance characteristics.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1058864
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Today’s building professionals and owners share enthusiasm for building envelope performance. Building envelopes separate the building interior from the exterior environment. As such, they are exposed to a variety of environmental loads, including wind pressure, solar radiation, and rain. This course provides an overview of the major thermodynamic considerations for the proper construction of the building envelope with a focus on insulated metal panels (IMPs) that provide all four control layers (air, water, vapor, and thermal) in a single-component system.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/848740
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Daylighting is the controlled admission of natural light into a building. It takes into consideration both direct and diffuse sunlight and reduces use of electric light, thereby decreasing energy costs. By controlling daylight, solar heat gain can be minimized, lowering the demand on HVAC systems. This course evaluates a variety of daylighting strategies for commercial applications and includes discussions about the relevance of daylight factor calculations and the impact fabric characteristics have on a shading solution.
https://redirect.aecdaily.com/s584379/www.aecdaily.com/course/593140
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This recorded webinar is the third of five sessions presented during the Building Science Master Summit held by DuPont Performance Building Solutions. This course dives into the topic of below-grade thermal performance and how to appropriately design for the long term. It explores heat loss patterns; energy code requirements and how they differ by region and building type; insulating best practices and benefits; and considerations for material selection.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/924077
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Redwood Timbers are a safe, strong, and sustainable option for exterior and interior building projects where natural wood is desired. This course provides an overview of the properties of Redwood Timbers including insulation properties, grades, dimensions, fasteners, finishing options, and strength. It concludes with numerous case studies exploring the use of Redwood Timbers for post and beam construction, decorative elements, deck posts, and outdoor living structures.
https://redirect.aecdaily.com/s632921/www.aecdaily.com/course/836218
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
This course provides an overview of the industry standards and code references for flashing materials used in the installation of windows and doors. The code-referenced material standards for window and door flashings are summarized and compared, and the standard installation practices developed by the three main fenestration industry organizations are reviewed. Applications of the window and door installation standards and principles are shown using standard flashing materials with a focus on commercial and multifamily buildings.
https://redirect.aecdaily.com/s904648/www.aecdaily.com/course/1007786
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Building owners have come to rely on weatherable coatings to provide long-term protection to their buildings. With an increased focus on sustainability, performance, and durability, PVDF resin-based coatings can help architects and painting contractors exceed their clients’ design goals. This course covers the key components and functions of high-performance weatherable coatings and looks at how these coatings contribute to sustainable design.
https://redirect.aecdaily.com/s616041/www.aecdaily.com/course/1048990
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The building envelope must withstand the effects of long-term exposure to the elements. This course explores rainscreen wall design and the control of hygrothermal loads. The traditional multicomponent backup wall assembly is compared with the single-component, insulated metal composite backup wall system, outlining key differences in design and construction and their overall effect on installation and performance.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/916307
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The durability of a home is affected by how well it is protected from moisture. This course reviews the methods of preventing and managing moisture in walls, the installation considerations of moisture management products, and the required tests and acceptance criteria for water-resistive barriers.
https://redirect.aecdaily.com/s18665/www.aecdaily.com/course/931898
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
From fashion to function, the shower space of the bathroom is a focal point, offering a place of quiet respite for rejuvenation. Shower spaces should be built to last, using durable materials combined with sound installation practices in order to reduce life cycle and replacement costs. This course outlines the criteria used in designing water management systems for shower pans and walls and includes discussions on traditional and modern methods of waterproofing shower floors and walls, new methods of construction, and the innovative design options that are available for curbless shower pans.
https://redirect.aecdaily.com/s13907/www.aecdaily.com/course/907639
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Low Impact Development (LID) has several advantages over traditional stormwater management approaches. Since impervious pavement is the main source of stormwater runoff, LID strategies recommend permeable paving for hard surfaces. The course discusses LID, its goals and principles, and how they are achieved. It provides an overview of permeable pavements, and more particularly, plastic permeable grid paver systems and how they support LID goals.
https://redirect.aecdaily.com/s705300/www.aecdaily.com/course/883759
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Kitchens have evolved, and so has the role of refrigeration in the home; there are a variety of factors that are contributing to this change. This course examines the social, economic, and demographic trends that are stimulating the reimagining of the kitchen space. The latest trends in kitchen design are discussed as is the role of modular refrigeration—a key design element in the creation of functional spaces that reflect the changing domestic landscape.
https://redirect.aecdaily.com/s14723/www.aecdaily.com/course/1000643
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The issue of safety is a prevalent theme in today’s society and protecting the built environment has become a priority. This course examines the material specifications, industry standards, hardware options, installations, and application considerations necessary to design and specify exterior pedestrian steel gates.
https://redirect.aecdaily.com/s6281/www.aecdaily.com/course/650252
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Cellulose insulation has been used successfully by builders and designers for hundreds of years to provide comfort and warmth. Today, builders and designers also consider sustainability principles, climate change, occupant health and wellness issues, energy conservation, and carbon sequestration. Advanced cellulose insulation addresses all those areas as well. This course explains its environmental benefits, including its carbon capture ability, how it improves occupant health and well-being, and its numerous high-performance thermal, acoustic, and fire-resistant attributes.
https://redirect.aecdaily.com/s379494/www.aecdaily.com/course/1067199
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Architects and designers have many options for specifying site furniture products for their projects. Selecting materials and finishes is an integral part of this process, yet making material selections has become more and more complex. The course examines conditions and constraints of outdoor environments; evaluates materials commonly used in outdoor applications; discusses using green building standards and rating systems, and the role of suppliers as resources for material selection; and provides examples of products that adhere to a higher environmental standard.
https://redirect.aecdaily.com/s779980/www.aecdaily.com/course/901445
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The primary purpose of a roof is to provide shelter and protection; to do so effectively over the long term, proper drainage and ventilation are required. Presented here are the categories of metal roofing, the moisture- and noise-related issues associated with architectural metal roofs, the use of a three-dimensional drainage and ventilation mat as a solution to these issues, and best practices for incorporating a mat in metal and cedar roof assemblies.
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/985501
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Architects and other design professionals have a critical role to play in reducing global greenhouse gas emissions through building design and product selection. The urgent need to reduce both operational and embodied carbon means that building designers must be familiar with transparency documents that facilitate low-carbon product selection. In this course, we review the types of carbon of concern, transparency documents that provide critical information, and tools for sourcing embodied carbon information. We also look at the contribution of insulated metal panels to both low embodied and low operational carbon buildings.
https://redirect.aecdaily.com/s3379/www.aecdaily.com/course/1090403
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Architectural railing systems offer safety, durability, strength, and design flexibility for a variety of indoor and outdoor applications. This course provides an overview of the important factors that need to be considered when selecting and specifying a railing system for a commercial or residential building project. Topics include materials and finishes, fabrication and installation, and relevant building codes and standards.
https://redirect.aecdaily.com/s8769/www.aecdaily.com/course/1000167
This course contains sustainable design information. See the course details page for more information.
This course contains accessible design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
With the range of ever-evolving uses of cold-formed metal framing, it is important for the building professional to be current with the latest product developments and innovations. This course begins with an overview of steel specification, followed by a discussion of a new, preassembled, double-stud sound guard system designed for superior acoustical performance. Also included is a review of fire-rated assemblies, including the recent developments and the expansion of UL assembly inclusions for the three different shaftwall studs (CH-stud, CT-stud, and I-stud).
https://redirect.aecdaily.com/s12639/www.aecdaily.com/course/891433
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
